Feasa傳奇分析器
Feasa圖例是一個針對具有較大LED計數的應用程序的測試解決方案。
Feasa圖例系統由兩個部件組成，一個集線器和一個
衛星分析器。集線器可以安裝在測試站中或安裝在
測試固定裝置，并可控制多達8個衛星分析儀。每個衛星分析器
可以測試多達20個led，所以一個完整的集線器可以測試多達160個led
同時地強度和普通顔色空間的穩定讀數：色調，
飽和度、強度（HSI）、優勢波長、CCT、CIE xy色度。
圖例的工作波長範圍為450-650nm，和溫度
範圍0-50°C。
Feasa圖例輪毂的尺寸為130x55x30mm；圖例分析器的尺寸
是120x29x50毫米。每個通道的纖維長度為0.6米，纖維有一個直徑
彎曲半徑為1.0mm，包括包層，彎曲半徑為15毫米。
驅動程序/軟件：用于測試的DLL，Labview中的編程示例，C++。
此外，Feasa還提供了一些方案，以允許進行最有效率的工作
并适當使用分析儀。
輸出：紅、綠、藍（RGB）、色相、飽和度、強度（HSI）、主導波長、
CCT，CIE xy，CIE u‘v’取決于所使用的接口。
驅動程序/軟件：用于測試的DLL，Labview中的編程示例，C++
型号：輪毂，20L、10L
Feasa Legend Analyser
The Feasa Legend is a test solution for applications with large LED counts.
The Feasa Legend system consists of two component parts, a Hub and a
Satellite Analyser. The Hub can be mounted in the Test Station or in the
Test Fixture and can control up to 8 Satellite Analysers. Each Satellite Analyser
can test up to 20 LEDs so a fully populated Hub can test up to 160 LEDs
concurrently. Stable readings in Intensity and Common Colour Spaces: Hue,
Saturation, Intensity (HSI), Dominant Wavelength, CCT, CIE xy Chromaticity.
The Legend has an operating wavelength range of 450-650nm, and temperature
range of 0-50°C.
The Feasa Legend Hub dimensions are 130x55x30mm; the Legend Analyser dimensions
are 120x29x50mm. Each channel has a fiber length of 0.6m, the fiber has a diameter
of 1.0mm including cladding, and a bend radius of 15mm.
Drivers/ Software: DLL used for Testing, Programming examples in Labview, C++.
In addition Feasa also provides a number of programmes to allow for the most efficient
and appropriate use of the analyser.
Output: Red, Green, Blue (RGB), Hue, Saturation, Intensity (HSI), Dominant Wavelength,
CCT, CIE xy, CIE u’v’ depending on interface used.
Drivers/ Software: DLL used for Testing, Programming examples in Labview, C++
Model Numbers:
HUB, 20L, 10L
